¶ PI5
¶ Argon 40 - ArgonOne v3
☑️ Supported by recalbox
¶ PI4
¶ PIStation
☑️ Supported by recalbox
.jpg)
¶ NESPi 4 CASE
☑️ Auto detected by Recalbox
¶ Argon One
☑️ Supported by recalbox
¶ PiBoy DMG
☑️ Auto detected by Recalbox
¶ GPi CASE 2 (CM4)
☑️ Auto detected by Recalbox
We advice against using CM4 with flash memory (eMMC), because, by design by Raspberry foundation, eMMC will take place of GPI Case 2 microSD access, making unusable this port.
You will have access only to eMMC for installing Recalbox.
¶ Raspberry Pi Touch Display
☑️ Supported by Recalbox
You'll have to plug an HDMI display first to enable the display.
¶ Pi ZERO/Pi ZERO W
¶ GPi CASE
☑️ Auto detected by Recalbox
¶ PI2/PI3/PI3B/PI3B+
¶ NESPi CASE
☑️ Supported by recalbox
¶ NESPi CASE PLUS
☑️ Supported by recalbox
¶ SUPERPI CASE J
☑️ Supported by recalbox
¶ SUPERPI CASE U
☑️ Supported by recalbox
¶ SUPERPI CASE U (New)
☑️ Supported by recalbox
¶ MEGAPi CASE M
☑️ Supported by recalbox
¶ Raspberry Pi Touch Display
☑️ Supported by Recalbox
You'll have to plug an HDMI display first to enable the display.
¶ Thingivers
There is no preview, there is much differents cases to print with a 3D printer.
¶ PI4 Functional cheap case
¶ GeeekPi
¶ GeeekPi
¶ Bruphny
¶ Odroid XU4
¶ Gaming case
