Le Supermodel émule la plateforme d'arcade Sega Model 3.
Il utilise OpenGL 2.1 et SDL, et peut fonctionner sous Windows, Linux et macOS.
Il s'agit d'une sortie publique anticipée de Supermodel. Il s'agit d'un document très préliminaire, la version alpha du logiciel.
Le développement a débuté en janvier 2011 et s'est concentré sur les aspects de rétro-ingénierie du Model 3 encore inconnu.
Par conséquent, de nombreuses caractéristiques importantes, telles que une interface utilisateur appropriée, ne sont pas encore mises en œuvre et la compatibilité des jeux est encore faible.
Ce core est sous licence GPLV3.
RPI0/RPI1 | RPI2 | RPI3 | RPI4/RPI400 | ODROID XU4 | ODROID GO | PC x86 | PC x86_64 | RG353 |
---|---|---|---|---|---|---|---|---|
❌ | ❌ | ❌ | ❌ | ❌ | ❌ | ✅ | ✅ | ❌ |
Fonctionnalité | Supporté |
---|---|
Pause | ✔︎ |
Sauvegardes instantanées | ✔︎ |
Captures d'écran | ✔︎ |
Aucun bios n'est requis.
Model3 se base sur le romset de Mame 0.235.
Vous devez obligatoirement passer votre romset MAME dans ClrMamePro pour avoir un romset Model3 fonctionnel.
Afin de trier vos roms arcade, le fichier dat est disponible dans le dossier
/recalbox/share/bios/supermodel/
.
Placez les roms comme ceci :
┣ 📁 recalbox
┃ ┣ 📁 share
┃ ┃ ┣ 📁 roms
┃ ┃ ┃ ┣ 📁 model3
┃ ┃ ┃ ┃ ┣ 🗒 jeu.zip
Pour pouvoir conserver vos configurations personnalisées lors d'une mise à jour, nous vous conseillons d'utiliser notre fonctionnalité Surcharges de configuration.
#
# #### ### ###
# ## ## ## ##
# ### ## ## ## ### #### ## ### ## ## #### ## #### ##
# ### ## ## ## ## ## ## ### ## ####### ## ## ##### ## ## ##
# ### ## ## ## ## ###### ## ## ####### ## ## ## ## ###### ##
# ## ## ## ## ##### ## ## ## # ## ## ## ## ## ## ##
# #### ### ## ## #### #### ## ## #### ### ## #### ####
# ####
#
# A Sega Model 3 Arcade Emulator.
# Copyright 2011 Bart Trzynadlowski, Nik Henson
# ----------------------------- CONTROLLERS -------------------------------- #
# The rate at which analog control values increase/decrease
# when controlled by a key. Valid range is 1-100, with 1
# being the least sensitive (slowest response) on default [25]
sensitivity=25
# Specifies the saturation, the position at which the joystick
# is interpreted as being in its most extreme position,
# as a % of the total range of the axis, from 0-200.
# A value of 200 means that the range will be halved, on default [100].
saturation=100
# Specifies the dead zone as a percentage,
# 0-99, of the total range of the axis.
# Within the dead zone, the joystick is inactive on default [2].
deadzone=2
# ------------------------------- AUDIO ------------------------------------- #
# Master Volume in %
sound-volume=100
# Set Music volume in %
music-volume=100
# Swap left and right audio channels
flip-stereo=0
# Relative front/rear balance in %
balance=0
# Disable sound board emulation sound effects
no-sound=0
# Disable Digital Sound Board MPEG music
no-dsb=0
# Select your sound engine:
# New SCSP engine based on MAME [0]
# Legacy SCSP engine [1]
sound-engine=0
# ------------------------------- VIDEO ------------------------------------- #
# set your graphics resolution automaticly with [auto]
# or set on this format [1280,1024] or [none] if needed
resolution=auto
# set on default ratio with [0]
# Expand 3D field of view to screen width [1]
# ignoring aspect ratio with [2]
screen-ratio=0
# Disable 60 Hz frame rate lock
no-throttle=0
# New 3D engine on default [0] enable
# Legacy 3D engine only if no image only sound set [1] to enable
3d-engine=0
# Use 8 texture maps for decoding
multi-texture=0
# Enable proper quad rendering
quad-rendering=0
# Crosshairs configuration for gun games
crosshairs=1
# -------------------------------- CORE ------------------------------------- #
# Run graphics rendering in main thread
no-gpu-thread=1
# Disable [0], Enable [1] multi-threading.
no-threads=0
# The PowerPC frequency in MHz.
# The default is [50].
ppc-frequency=100
# Enable [1] or Disable [0] menu services [L3=test, R3=service]
service-button=1
# Log level information in Supermodel.log
# Default value : info
# add value : error
log-level=info
Emplacement du fichier : /recalbox/share/system/configs/model3/ConfigModel3.ini